Robot Not a Dev? Pre-order Now
Not a Dev?

Misty Community Forum

5.3.19 Release Notes

misty-ii
release-notes
#1

Welcome, Misty Developers!

We’re excited to announce the next system update for Misty II field trial robots. In addition to various bug fixes and improvements, this release upgrades Misty’s API with new proportional integral derivative (PID) driving commands. You can use these commands to have Misty make precise turns or drive in straight lines and automatically correct variations from a specific absolute heading. We’ve also updated Misty’s system to remember credentials for Wi-Fi networks to which she has previously connected.

Please note: Misty I robots will not receive an update with this release.

Because this release is being delivered as an over-the-air (“OTA”) update, Misty will automatically update within the next 24 hours (the precise timing of the update’s availability may vary by region). You also have the option of checking to see if the update is available and initiating the process yourself via the API Explorer. Note: If your Misty II is on a version of the Home Robot app earlier than 2.0.3.0, you’ll need to check for updates using an older version of the API Explorer.

Important: When Misty’s battery is charged or she is connected to power, she checks for and installs available updates each time she boots up. Misty reboots once during a system update. All commands except Halt and Stop are disabled while Misty is updating. If Misty starts to install an update while charging, please do not disconnect Misty from her power source until her eyes are fully open again.

As always, we look forward to your feedback!

Note: If you have issues with a system upgrade or need technical assistance for other reasons, for the quickest response you can:

  • Post a message to the Support category here in the Community forums.
  • Mention @support with your post.
  • Post a message in MistyCommunity Slack in the technical_support channel.

Release Contents

  • Misty I - No Updates
    • Window IoT Core OS: version 10.0.17134 or higher - No updates
    • Android OS: (7) No updates
    • Home Robot app: version 1.1.14.0 - No Updates
    • MC firmware: version 1.1.14.3 - No Updates
    • RT firmware: version 1.1.14.3 - No Updates
    • Sensory Service app: version 1.1.14.3 - No Updates
  • Misty II - Updates
    • Window IoT Core OS: version 10.0.17134 or higher - No updates
    • Android OS: (8) No updates
    • Home Robot app: version 2.0.4.0
    • MC firmware: version 2.0.4.1
    • RT firmware: version 2.0.4.1
    • Sensory Service app: version 2.0.4.1
  • Companion App - No Updates
    • iOS: v1.2.16
    • Android: v1.2.0 (190422)
  • Tools
  • Misty Community GitHub: No Updates
  • Misty Sample Skills GitHub: No Updates
  • Docs - Updates (major changes listed)

New Features

  • Ability to drive Misty in an arc or in a straight line while correcting variations from a specific absolute heading.
    • Use the DriveHeading JavaScript and REST API commands to drive Misty II in a straight line and correct variations from a specific absolute heading.
    • Use the DriveArc JavaScript and REST API commands to drive Misty in an arc to face a specific absolute heading.
  • Ability for Misty II to remember Wi-Fi networks to which she has previously connected.
    • Use the ConnectToSavedWifi command to connect Misty to a saved WiFi network.
    • Use the GetSavedWifiNetworks command to obtain a list of Misty’s saved networks.
    • Use the ForgetWifi command to remove the credentials for one or more networks from Misty’s list of saved networks.

Bug Fixes & Improvements

  • Misty can now take pictures at full resolution (13MP) with her RGB camera.
  • Improved the performance of Misty’s computer vision service.
  • Fixed an issue where Misty could not upload image and audio files that are exactly or slightly less than 3MB.
  • Fixed a bug where Misty would play back audio at the robot’s default volume instead of 0 in cases where the PlayAudio command specified a volume of 0.
  • Misty now sends an AudioPlayComplete message for audio clips that are interrupted when she starts to play a new file.
  • Misty now uses degrees as the default unit of measurement for arm and head movement commands. Event messages, WebSocket data, and callback data objects now return angular values as degrees.
  • Various bug fixes and improvements to the API Explorer, including better notifications and constrained volume values for audio commands.
  • UX improvements to face training process. While learning a new face, Misty II now sends messages to communicate the status of training.
  • Fixed an issue that prevented Misty from showing large images on her display.
  • Misty II’s chest LED now “breathes” orange while she is charging. The LED becomes static orange when her battery is fully charged.
  • For Misty II, the misty.SendExternalRequest() method no longer takes an argument for the return type of the expected response.
  • Various improvements to request timeouts and other types of response messages in Misty’s REST API.

New Known Issues

There are no new known issues with this release. For a list of all known issues with Misty I Developer Edition and Misty II field trial robots, see the Known Issues section of the community forums.

listed #2